Accelerators & Anchors

Ready To Use Extra Quick Setting Compound(final setting time is 6-12 mins)

Properties: Does not corrode steel and is easy to use.

Application Area: For repairing cracks in cement pipes, floor, concrete doors, windows, concrete pipes etc. Compressive strength achieved is 150kg/cm² in 2 hour. 300kg /cm² in 1day, 400kg /cm² in 2days.

Application Method: Add ALGIRAPIDCEM to water in the ratio of 5:1 by volume & knead it into a dough. Hold it in hand till it is warm and then place in the cracks.

Coverage: 0.45sq. ft./ kg for 12mm thickness.

Extra Quick Setting Admixture(final setting time is 5-12 mins)

Properties: For sealing severe water infiltration in case of dams, harbours, basements. Compressive strength is 120 Kg/cm2 for 2 hours and 140 Kg/cm2 for 2 days.

Application Method: Add ALGIPLAST RAPIDSET to cement in the ratio of 1:3.5 by volume and knead it into a dough and hold it in the hand until it is warm. Hold this into the crack till it sets.

Coverage: 26 Litre per bag of cement.

Expanding Cementatious Anchor Grout For Tunneling Work

Properties: It has expansion & thixotropic property & is supplied in plastic capsules. Hence it saves labour cost. Highly economical compared to resin capsules.

Application Method: Dip ALGIANCHOR capsule in water for 2 to 4 minutes until it absorbs water and then immediately place it into the pre drilled bore (hole). Drive reinforcing rod through the capsule.

Quick Setting Polyester Resin Based Anchor Grout

Properties: Algi-Anchor Res is a solvent free two component anchor grout that provides maximum anchorage for extension of rods in building construction. It also provides very high early strength.

Application Method: Mix well all the resin with powder (hardener) for 2 to 3 minutes manually or by using drill and paddle (maximum 600 R.P.M.). Quantity of powder can be reduced where higher flow is needed. Mixed resin should stand for 1 to 2 minutes to let the entrapped air escape.