Waterproofing Repairs

Properties: Water Proofing and water reducing admixture, the water proofing component in Algiproof plus reacts with cement to form an insoluble product that fills the pores. The plasticizer component further reduces the water cement ratio, this dual action of Algiproofplus makes concrete highly water proof.

Dosage: 200 Ml. per 50 Kg. Bag of cement.

Properties: Economical waterproofing admixture, based on highly refined lignosulfonates modified for excellent waterproofing quality, water reducing & strength increasing quality, suitable for RCC roof, basements, water reservoirs, external plastering, residential, commercial and high rise buildings, highly economical.

Dosage: 100-125 Ml. per Bag of cement.

Elastomeric Waterproofing cum Heat Insulation System

Properties: ALGIFLEXGUARD is a single component, elastomeric, UV stable and fungus resistant coating. It bridges minor cracks when applied in sufficient thickness. It doesn’t need water curing & hence saves time & cost of labour.

Application Method: Mix ALGIFLEXGUARD with water in the ratio of 1:0.4 and apply 2 coats. When applying the coating on hot surface making the surface wet with sponge just before application of the coating improves coverage.

Coverage: About 40 square feet per Kg for 2 coats.

Acrylic Polymer Admixture For Waterproofing System

Properties: ALGICOAT RC-104 coating has good breathing capacity and UV stability and hence can be applied on moist surface. It is suitable for waterproofing of terraces, bathrooms, masonry walls, water-tanks, basements etc.

Application Method: Mix 1 part of ALGICOAT RC-104 with 1.8 parts by volume of cement and apply 2 coats by brush on moist and cleaned surface. Needs 7 days of water curing.

Coverage: 1 liter of ALGICOAT RC -104 gives 25 sq. ft. coverage.

High Performance Elastomeric Waterproofing cum Heat Insulation System with Geotextile Mat

Properties: ALGI-FLEXSHIELD SP is suitable for RCC slabs, wall, asbestos sheets, China mosaic, plastic and metal roof sheets. This product has excellent adhesion, and is suitable for difficult to bond surfaces and during labour shortages as it has very low application cost . The coating is highly resistant to UV light and has excellent antifungal property.

Coverage: ALGI-FLEXSHIELD SP gives about 11--12.5 Sq. ft/kg for 4 coats with the geotextile mat on fairly smooth surface.

SBR Latex Polymer Additive For Polymer Modified Concrete/Motor

Properties: Makes cement mortar waterproof, flexible and reduces its w/c ratio. Also improves tolerance for poor curing practices.

Application Area: ALGI LATEX is used as a polymer additive for cement mortar in structural repairs and ALGI LATEX is mixed with cement and the slurry obtained is used as an anticorrosive coating.

Application Method: ALGILATEX should be mixed with water and added to cement mortar. Dosage: 3-6 kg per 50 kg cement.

Crystalline Waterproofing Coating For Negative side Waterproofing

Properties: ALGICRYSTALLEX is a crystalline coating when mixed with water gives waterproofing coating on concrete structures. It can be applied for waterproofing of bathrooms, basements, water tanks, swimming pools and masonry. It can be applied for both negative and positive sides and even on moist surfaces.

Application Method: After the surface preparation, apply the first coat made up of 1 part of ALGICRYSTALLEX and 0.5 part of water by volume. The mix should be well stirred. Apply the second coat after the first coat has dried for 1--2 hours. The coating should be cured by spraying water for 3--5 days.

For Structural Rehabilitation Especially For Vertical And Overhead Application

Properties: ALGIMICROCRETE-SP is a structural grade cementatious micro concrete designed for vertical application and for repairs/reinstatement of distressed reinforced concrete elements. ALGIMICROCRETE-SP is extremely useful in vertical and overhead application where non-sag thixotropic type product is required. ALGIMICROCRETE-SP is an ideal micro concrete for structural strengthening of columns, beams etc. without encasement.

Mixing & Application: Mix ALGIMICROCRETE-SP and water in the ratio of 6:1 (6 parts of powder and 1 part water) by weight or 7:2 (7 parts of powder and 2 part water) by volume and place the prepared motar.

Acrylic Based Colored/Colorless Decorative And Protective Water Proofing Sealer With Gloss Effect

Properties: ALGICOAT ACRYLIC is a colored or colorless glossy/mat waterproofing coating suitable for vertical/ sloping surfaces, clay tiles, bricks and laterite stones etc.

Coverage: 40sq. ft. per liter for 2 coats.

Application Method: Apply 2 coats of ALGICOAT ACRYLIC by brush on a clean & totally dry surface. If applied on moist surface the coating will peel off. Apply ALGICOAT ACRYLIC coating during morning or in the evening to get good coverage during summer.

A High Performance Heat Insulation System

Properties: Fungus Resistant coating which reduces heat within the building. Reduces or eliminates air-conditioning cost. The coating is highly resistant to damage due to scrubbing, abrasion, and UV Light. Suitable for RCC Slabs, asbestos, metal roofing sheets etc.

Application Method: Clean the surface with wire brush and wash with water. Dilute ALGIINSULEX SP with water in 1:0.5 ratio & apply 2 coats by brush. To get good coverage during summer, wet the surface by sponging just before application of the coating.

Coverage: About 40 sq. ft. per Kg for double coat.

Polypropylene Fibre For Concrete Mortar Reinforcement

Properties: ALGIFIBRE is a high performance modified polypropylene engineered fibre designed specifically for secondary reinforcement of concrete. ALGIFIBRE disperses in the concrete mix when added at the batching plant or at the job site to form a true 3 - dimensional reinforcement network which reduces cracking and increases the strength. ALGIFIBRE is made of poly propylene, it doesn't dissolve in alkaline solution like polyester and this alkali stable (Cement is highly alkaline) and gives long lasting benefit.

Dosage: Add at the rate of 120gms per bag of cement. Soak ALGIFIBRE 120 gm in 3to 4 liter water for 3-5 minutes and then add to premixed cement sand mortar.

Acrylic Based Colored/Colorless Decorative And Protective Water Proofing Sealer With Gloss Effect

Properties: ALGITILEGUARD S is an acrylic based durable, protective, decorative, water and weatherproof coating for concrete, masonry, clay tiles and brick surfaces. ALGITILEGUARD S is designed as a super durable the coating with added antifungal additive for excellent antifungal property.

Method of Usage: The surface to be coated should be dry and free from all impurities like dirt, grease, old paint, algae etc. which can be removed by wire brushing the surface. Once this is done, apply ALGITILEGUARD S using brush. For Gloss, Matt Coating: Apply 2 coats of ALGITILEGUARD S based on requirement.

Solvent Based Silicon Water Repellant With Mat Effect

Properties: Produces beading effect and keeps surface dry. Eliminates fungus and algae formation and provides for water proofing effect. Does not change the appearance of the surface. Suitable for exterior for the building, concrete, natural stone, clay tile, bricks etc.

Coverage: About 40 ft² / Ltr.

Application: Product should be applied with brush/spray as wet on wet application. Extra product should be applied on the surface to flood the area so that 5-6 inches of run down is achieved. Enough material should be applied on the surface so that it penetrates the surface up to 3-4 mm.